Free 3 month
100% Money Back
The count does not know, One said that he had CTAL-TA_Syll19_BEN Test Guide Online seen Mac an hour before in Westmoreland Street, If the candidates choose the wrong model then they won't be able to build a HQT-6761 Valuable Feedback good working lab which will help them to practice well for the certification exam.
NEW QUESTION: 1
The implementations group has been using the test bed to do a 'proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 188.8.131.52. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened DSW1 will not become the active router for HSRP group 10.
Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to the fault condition?
A. Under the track 1 object configuration delete the threshold metric up 1 down 2 command and enter the threshold metric up 61 down 62 command.
B. Under the track 10 object configuration delete the threshold metric up 61 down 62 command and enter the threshold metric up 1 down 2 command.
C. Under the interface vlan 10 configuration delete the standby 10 track1 decrement 60 command and enter the standby 10 track 10 decrement 60 command.
D. Under the interface vlan 10 configuration enter standby 10 preempt command.
On DSW1, related to HSRP, under VLAN 10 change the given track 1 command to instead use the track 10 command.
Topic18, Ticket 13: DHCP Issue
Topology Overview (Actual Troubleshooting lab design is for below network design)
* Client Should have IP 10.2.1.3
* EIGRP 100 is running between switch DSW1 & DSW2
* OSPF (Process ID 1) is running between R1, R2, R3, R4
* Network of OSPF is redistributed in EIGRP
* BGP 65001 is configured on R1 with Webserver cloud AS 65002
* HSRP is running between DSW1 & DSW2 Switches
The company has created the test bed shown in the layer 2 and layer 3 topology exhibits.
This network consists of four routers, two layer 3 switches and two layer 2 switches.
In the IPv4 layer 3 topology, R1, R2, R3, and R4 are running OSPF with an OSPF process number 1.
DSW1, DSW2 and R4 are running EIGRP with an AS of 10. Redistribution is enabled where necessary.
R1 is running a BGP AS with a number of 65001. This AS has an eBGP connection to AS 65002 in the ISP's network. Because the company's address space is in the private range.
R1 is also providing NAT translations between the inside (10.1.0.0/16 & 10.2.0.0/16) networks and outside (184.108.40.206/24) network.
ASW1 and ASW2 are layer 2 switches.
NTP is enabled on all devices with 220.127.116.11 serving as the master clock source.
The client workstations receive their IP address and default gateway via R4's DHCP server.
The default gateway address of 10.2.1.254 is the IP address of HSRP group 10 which is running on DSW1 and DSW2.
In the IPv6 layer 3 topology R1, R2, and R3 are running OSPFv3 with an OSPF process number 6.
DSW1, DSW2 and R4 are running RIPng process name RIP_ZONE.
The two IPv6 routing domains, OSPF 6 and RIPng are connected via GRE tunnel running over the underlying IPv4 OSPF domain. Redistrution is enabled where necessary.
Recently the implementation group has been using the test bed to do a 'proof-of-concept' on several implementations. This involved changing the configuration on one or more of the devices. You will be presented with a series of trouble tickets related to issues introduced during these configurations.
Note: Although trouble tickets have many similar fault indications, each ticket has its own issue and solution.
Each ticket has 3 sub questions that need to be answered & topology remains same.
Question-1 Fault is found on which device,
Question-2 Fault condition is related to,
Question-3 What exact problem is seen & what needs to be done for solution
Steps need to follow as below:-
* When we check on client 1 & Client 2 desktop we are not receiving DHCP address from R4 ipconfig ----- Client will be receiving Private IP address 169.254.X.X
* From ASW1 we can ping 10.2.1.254....
* On ASW1 VLAN10 is allowed in trunk & access command will is enabled on interface but DHCP IP address is not recd.
On R4 the DHCP IP address is not allowed for network 10.2.1.0/24 which clearly shows the problem lies on R4 & the problem is with DHCP
NEW QUESTION: 2
Box 1: Server 3 (Network Policy Server)
We use a Network Policy Server, Server3, to configure health policies.
Box 2: Server 1
* Server1 (Domain Controller)
'You can configure NAP clients through Group Policy or local computer policy. This feature is installed automatically on a domain controller running Windows Server 2008 and
Windows Server 2008 R2. This feature can be installed on a member server running
Windows Server 2008 or Windows Server 2008 R2. You can use Group Policy to configure
NAP settings on NAP clients running Windows Server 2008, Windows Server 2008 R2,
Windows Vista, Windows 7, and Windows XP SP3.
Box 3: Server 3 (Network Policy Server)
You configure remediation server groups on the Network Policy Server and reference a particular remediation server group as part of the network policy for non-compliant computers